Ein System aus zwei MCDLV4 schützt Kabel und Leitungen bis zu 24 km.

Das System kann dabei bis zu sechs Schutzgeräte ersetzen.

 2 Kabel- und Leitungsdifferenzialschutzgeräte
+2 Gerichtete Abgangsschutzgeräte (Backup)
+1 Transformator-Differenzialschutzgerät
+1 NA-Schutz / Netzentkupplungsgerät

= 6 Geräte in einem System

Die Schutzfunktionen des MCDLV4 wurden dahingehend erweitert, dass sie die Anforderungen der VDE-AR-N-4110:2018 erfüllen.

MCDLV4-2 highPROTEC Series

Teilenummer MCDLV4-2A0A0AA

Leitungsdifferentialschutz

Gehäuse: Housing suitable for door mounting

Please contact us if you need more information.

Variants Overview Table

Variant	At Stock	Hardware	Strommesseingang	Gehäuse	Interdevice Communication	Kommunikations-Ports	Umgebung
MCDLV4-2A0A1AA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Without protocol	Standard
MCDLV4-2A0A1BA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus RTU, IEC 60870-5-103, DNP 3.0 RTU \| RS485/terminals	Standard
MCDLV4-2A0A1EA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Profibus-DP \| RS485/D-SUB	Standard
MCDLV4-2A0A1TA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	IEC 60870-5-103, Modbus RTU, DNP 3.0 RTU \| RS485/terminals IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2A0A0AA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Without protocol	Standard
MCDLV4-2A0A0CA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2A0A0HA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100MB/RJ45	Standard
MCDLV4-2A0A0KA	NO	DI:8 DO:7	Standard Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Optical Ethernet 100MB/LC duplex connector	Standard
MCDLV4-2A1A0AA	NO	DI:8 DO:7	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Without protocol	Standard
MCDLV4-2A1A0CA	NO	DI:8 DO:7	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2D0A1CA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2D0A1DA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Profibus-DP \| optic fiber/ST-connector	Standard
MCDLV4-2D0A1EA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Profibus-DP \| RS485/D-SUB	Standard
MCDLV4-2D0A1FA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus RTU, IEC 60870-5-103, DNP 3.0 RTU \| optic fiber/ST-connector	Standard
MCDLV4-2D0A1GA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus RTU, IEC 60870-5-103, DNP 3.0 RTU \| RS485/D-SUB	Standard
MCDLV4-2D0A1HA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100MB/RJ45	Standard
MCDLV4-2D0A1TA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	IEC 60870-5-103, Modbus RTU, DNP 3.0 RTU \| RS485/terminals IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2D0A0HA	NO	DI:16 DO: 13	Standard Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100MB/RJ45	Standard
MCDLV4-2D1A1CA	NO	DI:16 DO: 13	Sensitive Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2D1A0AA	NO	DI:16 DO: 13	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Without protocol	Standard
MCDLV4-2D1A0CA	NO	DI:16 DO: 13	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Standard
MCDLV4-2D1A0CB	NO	DI:16 DO: 13	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100 MB/RJ45	Conformal Coating
MCDLV4-2D1A0HA	NO	DI:16 DO: 13	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Ethernet 100MB/RJ45	Standard
MCDLV4-2E0A1FA	NO	DI:24 DO:20	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus RTU, IEC 60870-5-103, DNP 3.0 RTU \| optic fiber/ST-connector	Standard
MCDLV4-2E0A1GA	NO	DI:24 DO:20	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	Modbus RTU, IEC 60870-5-103, DNP 3.0 RTU \| RS485/D-SUB	Standard
MCDLV4-2E0A1KA	NO	DI:24 DO:20	Standard Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Optical Ethernet 100MB/LC duplex connector	Standard
MCDLV4-2E1A1KA	NO	DI:24 DO:20	Sensitive Ground Current	Housing suitable for door mounting	ST connector, BFOC2.5, multi mode (up to 2 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Optical Ethernet 100MB/LC duplex connector	Standard
MCDLV4-2E1A0KA	NO	DI:24 DO:20	Sensitive Ground Current	Housing suitable for door mounting	LC duplex connector, mono mode (up to 24 km), multi mode (up to 4 km)	IEC 61850, Modbus TCP, DNP 3.0 TCP/UDP, IEC 60870-5-104 \| Optical Ethernet 100MB/LC duplex connector	Standard

Hardware
Strommesseingang
Gehäuse
Interdevice Communication
Kommunikations-Ports
Umgebung

Diese Kombination existiert nicht.

Bedingungen und Konditionen

MCDLV4-2

Weitbereichsnetzteil: 24 … 270 VDC / 48 … 230 VAC
Spannungsmessung von 0 V bis 800 VAC (300 VAC für manche Bestellvarianten)
Strommesseingänge immer für sowohl 1 A als auch 5 A
Interne Plausibilitätsprüfung von Einstellungen
Unmittelbar verfügbare Testfunktionen auch ohne Entfernen der Verdrahtung
Direkt verfügbare Menü-Sprachen: Englisch, Deutsch, Spanisch, Portugiesisch (BR), Französisch, Russisch, Polnisch, Rumänisch
Schnelle und selektive Erkennung beschädigter Kabel bzw. Leitungen.
Ermöglichung von unterbrechungsfreier Energieversorgung für wichtige Infrastruktur wie z.B. Flughäfen, Rechenzentren, Abwasserwerke,…)
Auf redundanten Ringarchitekturen können fehlerhafte Leitungen schnell abgeschaltet werden, ohne dass es für das Gesamtsystem zu einem Spannungsausfall kommt.
Zeit- und Stromstaffelungen werden unnötig, sodass man nicht auf Verzögerungen oder Zeitstufen bei Leistungsschaltern warten muss.

Downloads

Name	Öffnen
Specification
DOK-FLY-MCDLV4-2D.pdf	Öffnen
DOK-FLY-MCDLV4-2E.pdf	Öffnen
Manuals
Name	Öffnen
MCDLV4-3.7-DE-MAN_C.pdf	Öffnen
MCDLV4-3.7-EN-MAN_C.pdf	Öffnen

MCDLV4-2 highPROTEC Series

MCDLV4-2

Downloads

Specification

Manuals

Alternative Produkte:

MCA4-2 highPROTEC Series

Folgen Sie uns